Fire Sprinkler Systems

Sprinklers are simple devices that are individually operated by the heat from a fire. When a fire starts, hot gases rise to the ceiling. If a sprinkler is present, a glass bulb or solder link gets hot and at a specific temperature (typically 68°C), it breaks, releasing a cap and allowing water to flow onto a diffuser.
The diffuser breaks up the water flow into carefully controlled droplets which penetrate the fire plume and cool the burning material to below its ignition point, thus controlling the fire. Only the sprinkler(s) directly over the fire are operated.
The sprinklers are connected to pipe work, usually filled with water, which is supplied either from the water mains or from a storage tank via a pump. When a sprinkler operates, the flow of water in the pipe work operates a flow switch, which, in turn operates an alarm system. The flow of water is small, usually less than 1/100th of the water used by the Fire and Rescue Service.
Reliable and dependable
Sprinklers do not go off accidentally and are only triggered by real fires. They are also very reliable and only 1
sprinkler in 16,000,000 exhibits any form of manufacturing defect.

AUTOMATIC WATER SPRINKLER SYSTEM :

One of the oldest & traditional ways of fire protection, which is water based protection system, is in the form of automatic sprinklers.
FirePro can provide you with complete designing of sprinkler system for any kind of hazard.
Our design facility also has the provision for calculation of water demand using latest licensed hydraulic calculation software’s which will accurately determine the water demand as per the standards.
Various sprinkler system network designing can be done to cater the specific needs of the customers varying from residential to commercial and industrial.